Valid Dumps NSE7_EFW-7.2 Sheet, NSE7_EFW-7.2 Visual Cert Test

Blog Article

Tags: Valid Dumps NSE7_EFW-7.2 Sheet, NSE7_EFW-7.2 Visual Cert Test, Study NSE7_EFW-7.2 Materials, Free NSE7_EFW-7.2 Study Material, Valid NSE7_EFW-7.2 Test Book

DOWNLOAD the newest PassCollection NSE7_EFW-7.2 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1XTToRENo9hHnVqE5oV0C1S41l8IKRv0u

You only need 20-30 hours to learn our NSE7_EFW-7.2 test braindumps and then you can attend the exam and you have a very high possibility to pass the exam. For many people whether they are the in-service staff or the students they are busy in their job, family lives and other things. But you buy our NSE7_EFW-7.2 prep torrent you can mainly spend your time energy and time on your job, the learning or family lives and spare little time every day to learn our Fortinet NSE 7 - Enterprise Firewall 7.2 exam torrent. Our answers and questions are compiled elaborately and easy to be mastered. Because our NSE7_EFW-7.2 Test Braindumps are highly efficient and the passing rate is very high you can pass the exam fluently and easily with little time and energy needed.

Fortinet NSE7_EFW-7.2 Exam Syllabus Topics:

Topic	Details
Topic 1	Security profiles: Using FortiManager as a local FortiGuard server is discussed in this topic. Moreover, it delves into configuring web filtering, application control, and the intrusion prevention system (IPS) in an enterprise network.
Topic 2	System configuration: This topic discusses Fortinet Security Fabric and hardware acceleration. Furthermore, it delves into configuring various operation modes for an HA cluster.
Topic 3	VPN: Implementing IPsec VPN IKE version 2 is discussed in this topic. Additionally, it delves into implementing auto-discovery VPN (ADVPN) to enable on-demand VPN tunnels between sites.
Topic 4	Central management: The topic of Central management covers implementing central management.
Topic 5	Routing: It covers implementing OSPF to route enterprise traffic and Border Gateway Protocol (BGP) to route enterprise traffic.

>> Valid Dumps NSE7_EFW-7.2 Sheet <<

NSE7_EFW-7.2 Visual Cert Test | Study NSE7_EFW-7.2 Materials

People can achieve great success without an outstanding education and that the Fortinet qualifications a successful person needs can be acquired through the study to get some professional certifications. So it cannot be denied that suitable NSE7_EFW-7.2 actual test guide do help you a lot; thus we strongly recommend our NSE7_EFW-7.2 Exam Questions for not only that our NSE7_EFW-7.2 training guide is designed to different versions: PDF, Soft and APP versions, which can offer you different study methods, but also that our NSE7_EFW-7.2 learning perp can help you pass the exam without difficulty.

Fortinet NSE 7 - Enterprise Firewall 7.2 Sample Questions (Q28-Q33):

NEW QUESTION # 28
You want to improve reliability over a lossy IPSec tunnel.
Which combination of IPSec phase 1 parameters should you configure?

A. keepalive and keylive
B. fragmentation and fragmentation-mtu
C. fec-ingress and fec-egress
D. Odpd and dpd-retryinterval

Answer: B

Explanation:
For improving reliability over a lossy IPSec tunnel, the fragmentation and fragmentation-mtu parameters should be configured. In scenarios where there might be issues with packet size or an unreliable network, setting the IPsec phase 1 to allow for fragmentation will enable large packets to be broken down, preventing them from being dropped due to size or poor network quality. The fragmentation-mtu specifies the size of the fragments. This is aligned with Fortinet's recommendations for handling IPsec VPN over networks with potential packet loss or size limitations.

NEW QUESTION # 29
After enabling IPS you receive feedback about traffic being dropped.
What could be the reason?

A. Np-accel-mode is set to enable
B. IPS is configured to monitor
C. Fail-open is set to disable
D. Traffic-submit is set to disable

Answer: D

Explanation:
Fail-open is a feature that allows traffic to pass through the IPS sensor without inspection when the sensor fails or is overloaded. If fail-open is set to disable, traffic will be dropped in such scenarios1. References:
= IPS | FortiGate / FortiOS 7.2.3 - Fortinet Documentation
When IPS (Intrusion Prevention System) is configured, if fail-open is set to disable, it means that if the IPS engine fails, traffic will not be allowed to pass through, which can result in traffic being dropped (D). This is in contrast to a fail-open setting, which would allow traffic to bypass the IPS engine if it is not operational.

NEW QUESTION # 30
Exhibit.

Refer to the exhibit, which shows a partial touting table
What two concisions can you draw from the corresponding FortiGate configuration? (Choose two.)

A. net-device is enabled in the tunnel IPSec phase 1 configuration
B. IPSec Tunnel aggregation is configured
C. add-route is disabled in the tunnel IPSec phase 1 configuration.
D. OSPI is configured to run over IPSec.

Answer: A,C

Explanation:
Option B is correct because the routing table shows that the tunnel interfaces have a netmask of 255.255.255.255, which indicates that net-device is enabled in the phase 1 configuration. This option allows the FortiGate to use the tunnel interface as a next-hop for routing, without adding a route to the phase 2 destination1.
Option D is correct because the routing table does not show any routes to the phase 2 destination networks, which indicates that add-route is disabled in the phase 1 configuration. This option controls whether the FortiGate adds a static route to the phase 2 destination network using the tunnel interface as the gateway2.
Option A is incorrect because IPSec tunnel aggregation is a feature that allows multiple phase 2 selectors to share a single phase 1 tunnel, reducing the number of tunnels and improving performance3. This feature is not related to the routing table or the phase 1 configuration.
Option C is incorrect because OSPF is a dynamic routing protocol that can run over IPSec tunnels, but it requires additional configuration on the FortiGate and the peer device4. This option is not related to the routing table or the phase 1 configuration. Reference: =
1: Technical Tip: 'set net-device' new route-based IPsec logic2
2: Adding a static route5
3: IPSec VPN concepts6
4: Dynamic routing over IPsec VPN7

NEW QUESTION # 31
You want to block access to the website ww.eicar.org using a custom IPS signature.
Which custom IPS signature should you configure?

Answer: A

Explanation:
Option D is the correct answer because it specifically blocks access to the website "www.eicar.org" using TCP protocol and HTTP service, which are commonly used for web browsing. The other options either use the wrong protocol (UDP), the wrong service (DNS or SSL), or the wrong pattern ("eicar" instead of "www.
eicar.org"). References := Configuring custom signatures | FortiGate / FortiOS 7.4.0 - Fortinet Document Library, section "Signature to block access to example.com".

NEW QUESTION # 32
Exhibit.

Refer to the exhibit, which shows the output from the webfilter fortiguard cache dump and webfilter categories commands.
Using the output, how can an administrator determine the category of the training.fortinet.com am website?

A. The administrator can look up the hex value of 34 in the second command output.
B. The administrator must add both the Pima in and Iphex values of 34 to get the category number
C. The administrator must convert the first two digits of the Domain hex value to a decimal value
D. The administrator must convert the first three digits of the IP hex value to binary

Answer: A

Explanation:
* Option B is correct because the administrator can determine the category of the training.fortinet.com website by looking up the hex value of 34 in the second command output. This is because the first command output shows that the domain and the IP of the website are both in category (Hex) 34, which corresponds to Information Technology in the second command output1.
* Option A is incorrect because the administrator does not need to convert the first three digits of the IP hex value to binary. The IP hex value is already in the same format as the category hex value, so the administrator can simply compare them without any conversion2.
* Option C is incorrect because the administrator does not need to add both the Pima in and Iphex values of 34 to get the category number. The Pima in and Iphex values are not related to the category number, but to the cache TTL and the database version respectively3.
* Option D is incorrect because the administrator does not need to convert the first two digits of the Domain hex value to a decimal value. The Domain hex value is already in the same format as the category hex value, so the administrator can simply compare them without any conversion2. References: =
* 1: Technical Tip: Verify the webfilter cache content4
* 2: Hexadecimal to Decimal Converter5
* 3: FortiGate - Fortinet Community6
* : Web filter | FortiGate / FortiOS 7.2.0 - Fortinet Documentation7

NEW QUESTION # 33
......

As long as you have a try on our products you will find that both the language and the content of our NSE7_EFW-7.2 practice braindumps are simple. The language of our NSE7_EFW-7.2 study materials is easy to be understood and suitable for any learners. The content emphasizes the focus and seizes the key to use refined NSE7_EFW-7.2 Exam Questions And Answers to let the learners master the most important information by using the least amount of them.

NSE7_EFW-7.2 Visual Cert Test: https://www.passcollection.com/NSE7_EFW-7.2_real-exams.html

What's more, part of that PassCollection NSE7_EFW-7.2 dumps now are free: https://drive.google.com/open?id=1XTToRENo9hHnVqE5oV0C1S41l8IKRv0u

Report this page

VALID DUMPS NSE7_EFW-7.2 SHEET, NSE7_EFW-7.2 VISUAL CERT TEST

Valid Dumps NSE7_EFW-7.2 Sheet, NSE7_EFW-7.2 Visual Cert Test